Hello, welcome to All-trust WD (Suzhou) Intelligent Technology Co., Ltd. official website!
18682384422(WeChat)Site map|Legal Notice
English
Products
German Neugart gearbox Germany R+W -couplings Str Ronse gear LIMON模组
Economy gearbox Precision gearbox NGV
  • 经济型减速机
  • 经济型减速机
  • 经济型减速机
经济型减速机
Type:WPLFE
WPLFE series

◆ Simple and reliable installation

◆ High torsional stiffness, suitable for precision drive solutions

◆ Low installation height and space saving

  • 经济型减速机
  • 经济型减速机
  • 经济型减速机

Even in the face of difficulties, we should break through the limitations and give play to innovative thinking. WPLFE is a right angle planetary reducer with a compact flange output shaft. It can save up to one-third of the space and has a five fold increase in torsional stiffness. With its standardized flange interface, the planetary reducer is easy to install. The built-in locating pin hole also provides additional security when fixing.

characteristic

High torsional stiffness for precision drive solutions

Fast and safe installation

Low installation height, space saving

High flexibility during installation

Lifetime lubrication, therefore maintenance free

Optimized bearing design, excellent performance

Reducer parameters WPLFE064 WPLFE90 WPLFE110 P
transmission ratio
3, 4, 5, 7, 8, 10 one
transmission ratio 9,12,15,16,20,25,32,40,64,100 two
service life h twenty
T2N ×Service life at 0.88 h thirty
Efficiency at full load % 94/93
Minimum operating temperature/maximum operating temperature -25/90
Degree of protection IP54
Standard lubrication Grease (lifetime lubrication)
Food grade lubrication Grease (lifetime lubrication)
Low temperature lubrication Grease (lifetime lubrication)
Installation position arbitrarily
Standard return clearance arcmin <16-<18 <13-<15 <11-<13
Torsional stiffness Nm/arcmin 2.9-9.9 5.8-29.5 15.9-69.0
Weight of reducer kg 1.8-2.1 4.5-5.3 10.5-12.5
Standard box surface Box: steel - oxidized after heat treatment (black)
Running noise dB/(A) seventy seventy-three seventy-five
Maximum bending moment based on reducer input flange
Nm five ten point five twenty-six



Rated output torque

WPLFE064 WPLFE090 WPLFE110 I P
fourteen forty eighty three one
nineteen fifty-three one hundred and five four
twenty-four sixty-seven one hundred and thirty five
twenty-five sixty-five one hundred and thirty-five seven
eighteen fifty one hundred and twenty eight
fifteen thirty-eight ninety-five ten
forty-four one hundred and thirty two hundred and ten nine two
forty-four one hundred and twenty two hundred and sixty twelve
forty-four one hundred and ten two hundred and thirty fifteen
forty-four one hundred and twenty two hundred and sixty sixteen
forty-four one hundred and twenty
two hundred and sixty twenty
forty one hundred and ten two hundred and thirty twenty-five
forty-four one hundred and twenty two hundred and sixty thirty-two
forty one hundred and ten two hundred and thirty forty
eighteen fifty one hundred and twenty sixty-four
fifteen thirty-eight ninety-five one hundred


Output shaft load

WPLFE064 WPLFE090 WPLFE110
Radial force of 20000h N five hundred and fifty one thousand and four hundred two thousand and four hundred
Axial force of 20000h N one thousand and two hundred three thousand three thousand and three hundred
Radial force of 30000h N five hundred one thousand and two hundred two thousand and one hundred
Axial force of 30000h N one thousand and two hundred three thousand three thousand and three hundred
20000 h tilting moment Nm twelve forty-six one hundred and nine
30000h inclination moment Nm eleven forty ninety-six


Geometric dimensions

WPLFE064 WPLFE090 WPLFE110 P
Pitch circle diameter of mounting hole at output end mm thirty-one point five fifty sixty-three
Output flange retaining boss diameter mm sixty-four ninety one hundred and ten
Diameter of output flange mm eighty-six one hundred and eighteen one hundred and forty-five
Total length mm one hundred and ten one hundred and forty-nine one hundred and ninety-eight point five one
mm one hundred and twenty-two point five one hundred and sixty-five point five two hundred and twenty-five point five two
Length of output flange mm nineteen point five thirty twenty-nine